Magnet med en statisk stator og en lysvinding 50-125c
50-150cc 4-tahtissæt magneto bundplade
MAGNET / STAATOR LIGHT COIL - 50-150cc 4-stroke
Magneto / staator with light coil for 50cc 70cc 90cc 110cc 125cc 140cc 4-stroke Honda-type engines. Suitable for almost all 50-140cc machines with Honda licensed engine.
With this light coil staator it is possible to get lights working on a pitbike! The staator has a vital role in the mopeds, pitbikes and quads, it creates power together with the flywheel. The staator creates spark for the engine and in this light coil model also power for the lights and other possible smaller power needs in the vehicles. Order if needed a voltage regulator from the additional accessories bar to regulate the voltage to 12 volts and to fix the flickering lights etc.
This universal model magneto / staator fits on almost all brands, such as Monkey, Samurai, Comanche, Fude GXT, Pitbike, Xmoto, Coman, Falcon, Kazuma etc.
This magneto is used on several Honda-type engines for example in quads, mopeds and pitbikes 50cc, 70cc, 72cc, 90cc, 110cc, 125cc and 140cc engines.
This part is usually the problem if the pitbike, quad or moped won't start / no spark. Check if the background plate of the staator is intact / if the impulse sensor is attached correctly.
Values for the coils of the staator / magneto:
- (impulse sensor about 130 Ohm) 110-140 Ohm, between the green and blue/white
- (spark power coil about 340 Ohm) 320-360 Ohm, between the green and black/red
- Black/red wire -> Spark power wire to CDI
- Blue/white wire -> Signal wire from impulse sensor to CDI
- Yellow/black wire -> Ground wire from CDI to the coil
- Green wire -> Common ground for CDI, coil, staator
- White wire -> Neutral wire, not used
- Outer diameter of the mounting plate 115 mm
- Outer diameter of the coils 84 mm
- Distance between the mounting holes (center to center) 101 mm
If the ohm values are correct and the background plate is intact, the problem is most likely in the CDI box / ignition unit.
Also, pay attention to the condition of the magneto cover, which has an important role in protecting the staator and flywheel of the moped, pitbike or quad. The magneto cover provides protection from chain breakages and jumps off the sprockets. It protects the staator from general dirt and grime as well. If the magneto cover is damaged, it is generally because of a chain issue. To prevent the magneto cover from damaging, it is important to pay attention to the correct tension of the chain, the condition of the chain and sprockets, and also a well-serviced chain line to increase the safety of use of the pitbike, quad or moped.
Fits the following models:
Honda Z50R 1999
Honda Z50R 1998
Honda Z50R 1997
Honda Z50R 1996
Honda Z50R 1995
Honda Z50R 1994
Honda Z50R 1993
Honda Z50R 1992
Honda Z50R 1991
Honda Z50R 1989
Honda Z50R 1988
Honda CRF50F 2021
Honda CRF50F 2020
Honda CRF50F 2019
Honda CRF50F 2018
Honda CRF50F 2017
Honda CRF50F 2016
Honda CRF50F 2015
Honda CRF50F 2014
Honda CRF50F 2013
Honda CRF50F 2012
Honda CRF50F 2011
Honda CRF50F 2009
Honda CRF50F 2008
Honda CRF50F 2007
Honda CRF50F 2006
Honda CRF50F 2005
Honda CRF50F 2004
Honda CRF70F 2012
Honda CRF70F 2011
Honda CRF70F 2009
Honda CRF70F 2008
Honda CRF70F 2007
Honda CRF70F 2006
Honda CRF70F 2005
Honda CRF70F 2004
Honda XR50R 2003
Honda XR50R 2002
Honda XR50R 2001
Honda XR50R 2000
Honda XR70R 2003
Honda XR70R 2002
Honda XR70R 2001
Honda XR70R 2000
Honda XR70R 1999
Honda XR70R 1998
Honda XR70R 1997
Fits most of the Chinese PitBike / MiniCross models 50cc, 70cc, 90cc, 110cc, 125cc (without electric start)

Facebook
Twitter