Relätimer 24V DDC-432 med LED-display

Digital timer relay suitable for various devices and applications

Easy-to-use, adjustable timer relay with an emergency stop function. The digital DDC-433 relay, suitable for various applications, can be used to time different functions, applications and devices. The digital timer with emergency stop function can be used to control, for example, engines, solenoid valves and lights. The versatile timer can be set continuously from 0.1 seconds to 999 minutes. The timer relay has a clear digital display, standby mode, emergency stop function and reverse polarity protection to increase safety.

Digital DDC-433 timer with versatile timing functions and emergency stop function

Press the set button for 2 seconds to enter the timer selection. Scroll with the arrow keys to select the desired mode P1-P4 and press the set button to select the mode. You can set the switching time for the relay by clicking the arrow key upwards and the display starts blinking. By pressing the arrow key down, you can set the seconds and by pressing the arrow key up, you can set the minutes. The switching time for the relay can be set from 0 to 99.9 seconds, and from 0 to 999 minutes. After setting the timing, press the set button for a long time, after which the device returns to the main display.

The emergency stop function of the timer can be activated by pressing the stop button. The stop button can be used to disconnect or connect the relay MOS transistor. By pressing the stop button for a long time, you can adjust the device's functions between standby and normal mode. In standby mode, the display of the digital timer can be turned off during timing.

Features

• Digital timer with emergency stop function
• Suitable for timing applications and devices
• Four separate timers can be set
• Timer 0-99.9 seconds and 0-999 minutes
• Stop button, short press for on/off, long press for standby/normal mode

Technical data

• Operating voltage DC 5-30 V
• Signal voltage DC 3-24 V
• Output voltage DC 5-36 V 15 A
• Power 400 W
• Operating temperature -40°C - +85°C
• Installation hole diameter 3 mm
• Dimensions 64 x 35 x 19.3 mm

Operating mode

P1 - After the signal is triggered, the MOS transistor triggers the conduction time and turns off. Select the action to be taken in the conduction time P1.1 - P.3
P1.1 - The signal is triggered again
P1.2 - The signal is timed again
P1.3 - The signal is reset, the MOS transistor is disconnected, and the timing stops
P2 - Give a signal when the MOS transistor is disconnected during the off time. The MOS transistor connects the conduction time. When the timing is finished, the MOS transistor is disconnected.
P3.1 - Give a signal when the MOS transistor connects the off time. Repeat the function until the MOS transistor is disconnected and the timing stops. Set the number of repetitions.
P3.1 - No trigger after the power is turned on. The MOS transistor turns on during the conduction time, then turns off the off time. The function can be repeated by setting the number of repetitions.
P4 - Signal holding function. When the relay is on, the timing is reset and the MOS stays on when the signal disappears. The MOS turns on during the timing and the signal is on.